Selecting Breakout Box Options
To access Options click the Options
icon 
on the Breakout Box toolbar or choose Breakout
Box options under the Options
menu.
Display Signal - This box shows which control signals the analyzer monitors.
- A check mark next to a control signal name indicates that the breakout box displays the status of that control signal.
- To prevent the analyzer from displaying the status of a signal, un-check the box next to it.
Window Refresh Rate - The refresh rate is the rate at which the analyzer updates the window.
- By default, the analyzer refreshes the display once every 1,000 milliseconds (one second.)
- To change the rate, highlight the number in the box and enter a new number. See Performance Notes for information on how Window Refresh Rate can affect performance.
Indicators - You can choose what type of indicators the analyzer uses.
- The default indicators are a green "+" sign to show a logically high state, and a red "-" sign to show a logically low state.
- To change the indicators, click on the down arrow and choose a pair of indicators from the list.
- As a reminder, the analyzer gives the definition of the indicators in the top part of the Breakout Box window.
